7 SERIES - SWIVEL
RESCUE DAVIT

Available In Both Bitt & Flat Mount Installations

The Rescue Davit that started it all. C-Hero's® patent pending 7 Series - Swivel represents the high end of our available davits. By cranking the winch, the boom pivots up towards the rescuer. Once topped off, you can turn the side crank to swing the boom left or right, bringing the MOB to the gunwales for an easy recovery.

Complete your davit system with either the standard VR-12 Rescue Pole + Standard Strap or the upgraded HR-12 Rescue Pole + Body Sling. Contact us for pricing.

Patent Pending in US, UK, Canada & Europe

"Yesterday we had an annual inspection....and the Coast Guard, once again, loved your device. I heard them saying that 'this tool should be a requirement'. It worked flawlessly during MOB drills."
D. Blohm
Golden State Bridge

EXAMPLE VIDEO

The video above is an actual MOB drill with our VR-12 Rescue Pole + Standard Strap and our 7 Series - Swivel Rescue Davit

+ Swivel Winch.png

FEATURES

  • Compact and easy to use and stow

  • Worm gear and handle, to control the boom swing

  • System features standard Harken 20ST Radial winch, Spinlock rope brake, and 10" winch handle

  • 23' long, 10 mm lift line with stopper ball and hook, 6 mm tension line

  • Bitt Mount - 2" adjustable polypro straps with latch clamps for tightening

  • Flat Mount - Anodized aluminum mount, with two tethered pins​

  • Winch can be upgraded to a 35 ST 2-speed winch 

ALL C-HERO DAVITS ACCOMMODATE BOTH BITT & FLAT MOUNT INSTALLATIONS

BITT MOUNT

Our Rescue Davit systems are light enough for one person to retrieve and carry into position.  It attaches in less than 30 seconds by way of two 2" polypropylene straps, top and bottom, with locking latch clamps for sinching around the bitt.  Rear body back angles steady the unit onto the bitt to prevent rocking. These back angles can be adjusted to accommodate taller and shorter bitts.  The davit bottom is chamfered to clear bitt welds in order to help prevent an uneven installation.  The 7 Series Bitt Mount comes complete with side feet to stabilize the unit during side to side boom operations. 

+ Swivel (3).png
+ Fixed Plus (5).png

FLAT MOUNT

Our Rescue Davit systems are light enough for one person to retrieve and carry into position. The Davit locks into the pre mounted receiving unit in less than 30 seconds and is secured by two thru pins.  The flat mount receiving unit, and the Davit, can be mounted on any structurally sound flat surface or handrail. Our Flat Mount Rescue Davits come complete with a single mounting bracket.  For versatility, order an additional receiving unit allowing for deployment on either side of the vessel.

SPECIFICATIONS

Height (cm/in)

132 / 52

Width (cm/in)

41 / 16

 Boom - Bitt Mount (m/ft)

2.03 / 6-8

Boom - Flat Mount (m/ft)

1.3 / 4-3

Weight - Bitt Mount *w boom (kg/lb)

22.2 / 49

Weight - Flat Mount *w boom (kg/lb)

17.7 / 39

Capacity - Bitt & Flat Mount (kg / lb)

158.8 / 350

RESOURCES

ACCESSORIES

Rescue Pole Overview

Rescue Pole Overview